`

R-Series: Green Compressors : Retail models only



Vehicle Traffic Systems : Compressors
  • 6 units minimum order
  • 7-20 units 10% discount
  • 21-100 units  25% discount
  • 101+ units 33% discount
 

Speed Hump Compressors

Specification notes:

1. These are typical or suggested configurations.  A wide variety of configurations are available in response to specific needs. 

2. A storage tank is required for continuous operations.

3. CFM depends on various traffic metrics; (i.e. flow rates, vehicle type, vehicle speed.)

4. Models configured for automotive and truck traffic.  Aircraft, train, and tracked vehicle configurations also available.

 

 
R-SHC330
 		Technical Specifications
Description Physical Dimensions Capacities  
Modular surface mounted units which can be combined  to any width.  Source and target heads are determined by the number of unit interconnections.  The unit can be staked into asphalt or gravel.   On concrete roadways the friction base will hold the unit in place at lower traffic speeds.  The recharge/discharge cycle (compression action) is optimized for 45 mph maximum traffic speed.
  • 35.5" long x 19.5" wide x 2.1" tall
  • approximately 55 lbs. each
  • Shipping weight 60 lbs each
  • 1-2 CF per vehicle
  • 800 Btu heat per vehicle
  • Equivalence: 13 Hp
  • 500-800 vehicles per hour
  • 100,000 vehicles life span
 
R-SHC450
 Technical Specifications
Description Physical Dimensions Capacities  
The dual-lane surface mounted unit will deliver significant air volumes at high PSI, with no additional power or regular maintenance.  The unit can be staked into asphalt or gravel.   On concrete roadways the friction base will hold the unit in place at lower traffic speeds.   The recharge/discharge cycle (compression action) is optimized for 55 mph maximum traffic speed.
  • 30' long x 36" wide x 3" tall
  • approximately 800 lbs. each
  • Shipping weight 865 lbs each
  • 1-3 CF  per vehicle
  • 1200 Btu per vehicle
  • Equivalence: 46 Hp
  • 500-800 vehicles per hour
  • 100,000 vehicles life span
R-SHC900
 Technical Specifications
Description Physical Dimensions Capacities  
Semi-permanent surface mounted installation for air compression .  The user can set the maximum height of the hump up to 5.25".  Maximum heights transfer large amounts of forward vehicle momentum into air compression.  The recharge/discharge cycle (compression action) is optimized for 65 mph maximum traffic speed.
  • 30' long x 42" wide x 3" - 5.25 tall
  • approximately 3000 lbs. each
  • Shipping weight 3,150 lbs each

 
  • 1-35 CF per vehicle
  • Equivalence:  250 Hp
  • 500-800 vehicles per hour
  • 100,000 vehicles life span
  
R-EHC970
 Technical Specifications
Description Physical Dimensions Capacities  
Semi-permanent embedded installation for air compression.    Constructed of recycled rubber, durable silicon, or carbon fiber, this unit can withstand repeated emergency situations.  The recharge/discharge cycle (compression action) is optimized for 80 mph maximum traffic speed.
  • 30' long x 42" wide x 3" - 18.35" deep
  • approximately 3000 lbs. each
  • Shipping weight 3,150 lbs each

 
  • 1-35 CF per vehicle
  • Equivalence:  250 Hp
  • 500-800 vehicles per hour
  • 250,000 vehicles life span